Minicom Advanced Systems Remote Power Switch Bedienungsanleitung PDF herunterladen (Seite 22)

OPERATING GUIDE

Note:The configuration of ‘Set SNMP Trap Receiver’ is only for the SNMP

Network Manager.

Follow the rest of the instructions as set out on the Telnet Main Menu.

25. Updating the firmware

Firmware updates can be found on our Website www.minicom.com. Please check

periodically.

To update the firmware:

1. Open the SNMP Utility (explained in the Quick Installation Guide) and click

Download Firmware. The Firmware Download box appears.

2. Browse to locate the new firmware file (*.bin).

3. Press Start. During the upgrade, the RPS red and yellow LEDs flash

alternately. On completion the RPS reboots.

Note: If uploading was interrupted, repeat the firmware update process.

1 2 ... 17 18 19 20 21 22 23 24

Keine Kommentare

Minicom Advanced Systems Remote Power Switch Bedienungsanleitung Seite 22