Minicom Advanced Systems Remote Power Switch Bedienungsanleitung PDF herunterladen (Seite 15)

REMOTE POWER SWITCH

17. RPS Setting

From the menu click RPS Setting. The RPS Setting window appears, see Figure 14.

Figure 14 RPS Setting window

Here you change RPS ID numbers (when relevant), give each power outlet a name

and define the type of power control.

Select RPS - When there are cascaded RPS units select the desired RPS here. The

outlets of that RPS then appear.

Address Change - When there are cascaded RPS units you must give each RPS

unit a new ID number. By default the units come with ID no. RPS00. This must be

changed for all cascaded units.

Changing the Manager ID number:

Before connecting any Slave units, change the Manager unit’s ID no. to RPS01.

To change the Slave ID numbers:

1. Connect the Slave units to the Manager unit one at a time.

2. In the Select RPS box, select the Slave (RPS00).

3. In the Address Change box select a new ID no. (RPS2-16).

4. Repeat this process for each Slave.

Identification – Type a description of the RPS unit e.g. Server room.

Outlet - Name - Type a name for each outlet. E.g. Web server.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Keine Kommentare

Minicom Advanced Systems Remote Power Switch Bedienungsanleitung Seite 15